Safety Cabriole Horse Riding Helmet - Red/Navy Blue

Ref :
8354507
Key feature
You will love this riding helmet thanks to its low weight and practicality. Each helmet size fits three head sizes. It adjusts automatically thanks to the elasticated harness.
£19.99*

5 AVAILABLE MODEL(S)

Products benefits

Adjustable
Elastic harness at the back to easily adjust the riding helmet.
User comfort
Inner foam pieces are removable and machine-washable.
Ventilation
14 holes and 8 ventilation channels.Forehead air inflow, ventilated nape.
Stability
The 4-point harness fits all around the head for better support.
Impact protection
Riding helmet complies with Directive 89/686/EEC.

Features

Temperature
Adjustable
Components
Main lining : 100.0% Acrylonitrile butadiene styrene (ABS) Foam : 100.0% Polystyrene (EPS) - Expanded
Approved by
UTAC, an independent laboratory appointed by the French authorities to conduct tests to establish compliance of safety equipment in accordance with the directives issued by the European Commission in Brussels. Recognised for its technical expertise, the laboratory is one of the official laboratories of independent European body EuroNCAP. UTAC also conducts tests on behalf of the United Nations. It has approved this helmet for use throughout the EU.
Tests
Tested in an independent laboratory in compliance with current regulations.
Designed to
protecting beginner riders riding 1-2 times a week, from impacts to the head in the event of a fall.
Guarantee
2 years

Advice

Care instructions
wash the exterior with soapy water, rinse and dry. Wash foam parts at 30°C max. Do not tumble dry.
Storage Tips
Store away from heat sources such as heating appliances or the parcel shelf of a car in the sun, as this can degrade the protective performance of the polystyrene padding.
RESTRICTED USE
For horse riding. REPLACE ANY HELMET THAT HAS SUFFERED AN IMPACT

Additional information

Sizes:
XS(51-53 cm), S(53-55 cm), M(55-57 cm), L(57-59 cm), XL(59-61 cm)
Ventilation
This riding helmet has 51 ventilation holes on the shell and 57 holes on the padding. These holes help the warm air to exit at the top and in the back of the riding helmet.
Flexible brim:
Flexible brim compliant with European standard.
Light weight:
400 g.
Adjusting the helmet:
For optimal protection, the helmet should be in close contact with the head without squeezing it. When the harness is properly adjusted the helmet should not slide forward, back, or from side to side.
Harness adjustment:
For optimal support, the helmet's harness/chinstrap should go under the throat, not over the chin.
Shock absorption:
This helmet has been designed to completely or partially absorb impacts to the rider's head in the event of a fall or violent impact. When an impact occurs, the helmet and/or the padding can deform or break to absorb the energy of the impact. DAMAGE MAY NOT BE VISIBLE, BUT ANY HELMET THAT HAS SUFFERED AN IMPACT MUST BE REPLACED.
Standard
The harmonised standard EN 1384 was repealed in October 2014. Until a new version is issued, in order for them to be sold in Europe, all helmets produced after 4 November 2014 must undergo testing and be CE marked. This mark must be accompanied either by Directive 89/686/EEC, or by the VG1 01.040 2014-12 document.
Information on standards:
EN 1384 certified helmets can still be worn in training and competitions. However, some organizations may require other standards for their competitions. If in doubt, we recommend that you consult the competition organiser.
Care advice:
Wash outer surface with soapy water, rinse, then dry. Wash foam parts at 30°C max. Do not tumble dry.

Users reviews

Write the first review

Post a comment
TOP OF PAGE