C400 Velour Horse Riding Hat Size 52 to 59 cm - Black

Ref :
8296901
Key feature
The essential riding hat for beginners. This riding hat with a felt covering is both comfortable and elegant.
£19.99*

2 AVAILABLE MODEL(S)

Products benefits

Stability
The 3-point harness encircles the head to keep the riding hat on just right.
User comfort
Foam head size adjustment allowing you to adjust helmet to rider's head.
Adjustable
Adjustable nylon harness with 2 slip buckles (nape and chin).
Impact protection
Riding helmet complies with Directive 89/686/EEC.

Features

Type
Not adjustable
Components
Outside shell - Main Lining : 100.0% Acrylonitrile butadiene styrene (ABS) Inside Shell - Main Lining : 100.0% Polystyrene (EPS) - Expanded
Approved by
UTAC, an independent laboratory appointed by the French authorities to conduct tests to establish compliance of safety equipment in accordance with the directives issued by the European Commission in Brussels. Recognised for its technical expertise, the laboratory is one of the official laboratories of independent European body EuroNCAP. UTAC also conducts tests on behalf of the United Nations. It has approved this helmet for use throughout the EU.
Tests
Tested in an independent laboratory in compliance with current regulations.
Designed to
protecting the head of the occasional rider from impacts in the event of a fall.
Guarantee
2 years

Advice

Care instructions
Steam brush the outside.
Storage Tips
Store away from heat sources such as heating appliances or the parcel shelf of a car in the sun, as this can degrade the protective performance of the polystyrene padding.
RESTRICTED USE
For horse riding. REPLACE ANY HELMET THAT HAS SUFFERED AN IMPACT

Additional information

Helmet adjustment
For optimal protection, the helmet should be in close contact with the head, but without compressing it. When the harness is properly adjusted the helmet should not slide forward, back, or from side to side.
Harness adjustment
For optimal support, the harness must go under the throat, like a chinstrap, not over the chin.
Shock absorption
The helmet is designed to absorb some of the energy from an impact through partial deformation of the shell or of the protective padding, or both. DAMAGE MAY NOT BE VISIBLE, BUT ANY HELMET THAT HAS SUFFERED AN IMPACT MUST BE REPLACED.
Information on standards
EN 1384 certified helmets can still be worn in training and competitions. However, some organizations may require other standards for their competitions. If in doubt, we recommend that you consult the competition organiser.
Standard
The harmonised standard EN 1384 was repealed in October 2014. Until a new version is issued, in order for them to be sold in Europe, all helmets produced after 4 November 2014 must undergo and be CE marked. This mark must be accompanied either by Directive 89/686/EEC, or by the VG1 01.040 2014-12 document.
Care advice
Steam brush the outside.

You may also be interested in these products

from
£29.99£24.99*
4.50 / 5 2 ratings
    £34.99*
    4.50 / 5 2 ratings
      £34.99*
      4.50 / 5 2 ratings
        TOP OF PAGE