The 4-point harness fits all around the head for better support.
Removable, machine washable, thick, comfortable 5 mm foam layer.
14 holes, 8 ventilation channels. Air enters at the front and exits at the back
Ease of use
Elastic harness at the back to automatically adjust the helmet.
Riding helmet complies with Directive 89/686/EEC.
A rating - CO2: 3.0 kg Energy: 17.2 kWh Water: 0.019 m3 - Details: oxylane.com
Inner padding: Expanded polystyrene (EPS) - Outer shell: Acrylonitrile Butadiene Styrene(ABS) - Foam: polyurethane (PU) - Straps: Polypropylene (PP)
UTAC, independent laboratory, appointed by the French authorities to conduct tests to establish compliance of safety equipment in accordance with the directives issued by the European Commission in Brussels. Recognised for its technical expertise, the organisation is one of the official laboratories of EuroNCAP, the European independent body. UTAC also conducts tests for the United Nations. It has approved this helmet for use throughout the EU.
Test lab terrain
Tested in an independent laboratory in compliance with current regulations.
protecting the rider's head from getting knocked in the event of a fall.
wash the exterior with soapy water, rinse and dry. Wash foam parts at 30°C max. Do not tumble dry.
Store away from heat sources such as heating appliances or the parcel shelf of a car in the sun. This can deteriorate the protective performance of the polystyrene inner padding.
For horse riding. REPLACE ANY HELMET THAT HAS SUFFERED AN IMPACT
Helmet with 14 vent holes and 4 channels. The 14 vents send warm air to the channels. The channels create air flow that removes this heat through the back of the helmet.
Flexible brim compliant with European standard.
For optimal protection, the helmet should be in close contact with the head, but without compressing it. When the harness is well adjusted, the helmet must not move forward, or from side to side.
For optimal support, the harness must go under the throat, like the chinstrap and not on the chin.
The helmet is designed to absorb some of the energy from an impact through partial deformation of the shell or of the protective padding, or both. DAMAGE MAY NOT BE VISIBLE, BUT ANY HELMET THAT HAS SUFFERED AN IMPACT MUST BE REPLACED.
The EN 1384 standard was repealed in October 2014. During the wait for a new standard, helmets manufactured after October 2014 require a CE mark in order to be sold in Europe. This mark must be accompanied either by Directive 89/686/EEC, or by the VG1 01.040 2014-12 document.
EN 1384 certified helmets can still be worn in training and competitions. However, some organizations may require other standards for their competitions. If in doubt, we recommend that you consult the competition organiser.
XS(51-53 cm), S(53-55 cm), M(55-57 cm), L(57-59 cm), XL(59-61 cm)
Distribution of ratings
This is hat is what it is, cheap and cheerful i went on the sizing chart on he site purchased hat but when it arrived it was way too small,exchanged in store for toally different hat
The way Decathlon handled the exchange with ease f Nothing
Fantastic customer service and will 100% use them again
* The prices listed on the site are the prices recommended by DECATHLON SA's central purchasing department.