Protection for the neck. 4 point harness.
Inner hat made of foam and mesh for greater comfort.
30 ventilation holes and 9 ventilation channels. Ventilated neck protection.
Harness can be adjusted using sliders.
Riding helmet complies with Directive 89/686/EEC.
E rating - CO2: 3.8 kg Energy: 23.2 kWh Water: 0.030 m3 - Details: oxylane.com
black / rhinestone.
Outside shell - Main Lining : 100.0% Acrylonitrile butadiene styrene (ABS) Inside Shell - Main Lining : 100.0% Polystyrene (EPS) - Expanded
UTAC, independent laboratory, appointed by the French authorities to conduct tests to establish compliance of safety equipment in accordance with the directives issued by the European Commission in Brussels. Recognised for its technical expertise, the organisation is one of the official laboratories of EuroNCAP, the European independent body. UTAC also conducts tests for the United Nations. It has approved this helmet for use throughout the EU.
Test lab terrain
Tested in an independent laboratory in compliance with current regulations.
protecting the rider's head from getting knocked in the event of a fall.
Steam brush the outside.
Store away from heat sources such as heating appliances or the parcel shelf of a car in the sun. This can deteriorate the protective performance of the polystyrene inner padding.
For horse riding. REPLACE ANY HELMET THAT HAS SUFFERED AN IMPACT
For optimal protection, the helmet should be in close contact with the head, but without compressing it. When the harness is well adjusted, the helmet must not move forward, or from side to side.
For optimal support, the harness must go under the throat, like the chinstrap and not on the chin.
The helmet is designed to absorb some of the energy from an impact through partial deformation of the shell or of the protective padding, or both. DAMAGE MAY NOT BE VISIBLE, BUT ANY HELMET THAT HAS SUFFERED AN IMPACT MUST BE REPLACED.
30 ventilation holes, facing forwards in the direction that the air enters and facing backwards in the direction that heat is removed. The polystyrene skull cap has ventilation channels that aid air flow. Air cooling system.
Hat composed of 2D and 3D mesh foam for better comfort and better breathability. The hat can be removed using its detachable fastening system in order to dry it or machine wash it at 30°C. If the helmet is a bit too big, you can insert wedges into the sides of the hat. Your helmet will then fit perfectly.
The EN 1384 standard was repealed in October 2014. During the wait for a new standard, helmets manufactured after October 2014 require a CE mark in order to be sold in Europe. This mark must be accompanied either by Directive 89/686/EEC, or by the VG1 01.040 2014-12 document.
EN 1384 certified helmets can still be worn in training and competitions. However, some organizations may require other standards for their competitions. If in doubt, we recommend that you consult the competition organiser.
Distribution of ratings
Fabulous Hat -
C700 Rhinestone Horse Riding Helmet - Black
Fabulous Hat fits really Well x
Very comfortable None
Nice hat got it for a great price in the sale
very chic cannot adjust the size too much
good value for money
* The prices listed on the site are the prices recommended by DECATHLON SA's central purchasing department.